
Basic configurations of process trains
Basic configuration of waste wood pelleting train, 1 t/hr capacity (raw material humidity is no more than 60 %)
1 – raw material charging; 2 –power station; 3 – heat generator; 4 – dryer cylinder; 5 – dried biomass withdrawal system; 6 – mill; 7 – compressed air system; 8 – screw feeder; 9 – hopper; 10 – dispenser; 11 – water/steam injection system; 12 – blender; 13 – feeding device; 14 – press; 15 – belt elevator; 16 – screening cooler unit; 17 – electrical equipment control cabinet. | Overall dimensions (m): | 6х6,5х6 |
Installed horse power: | 193 kW | |
Production capacity | 1 t/hr | |
Time of manufacture: | 3 month | |
Time of installation: | 1 week | |
Warranty period: | 1 year |
Basic configuration of straw pelleting train, 1 t/hr capacity (straw humidity is no more than 12 %)
1 – straw/roll transporter; 2 – disintegrator with screw conveyor feeder; 3 – mill; 4 – compressed air system; 5 – screw feeder; 6 – hopper; 7 – dispenser; 8 – steam injection system; 9 – blender; 10 – feeding device; 11 – press; 12 – belt elevator; 13 – screening cooler unit; 14 – electrical equipment control cabinet. | Overall dimensions (w/o straw pack transporter) | 6х6,5х6 |
Overall dimensions of straw pack transporter : | 11,4х1,7х2,3 | |
Installed horse power: | 193 kW | |
Production capacity: | 1 t/hr | |
Time of manufacture: | 3 month | |
Time of installation: | 1 week | |
Warranty period: | 1 year |